Built here in North Carolina
Roll-Off Trailers & Hoists in North Carolina
Cable roll-off trailers and Class 5–8 truck hoists, welded and wired at our Statesville plant about 45 minutes up I-77 from Charlotte. North Carolina dumpster rental owners, contractors and farmers can drive over, see the shop and buy straight from the builder.
2026
NATDA Overall Trophy
Class 5–8
Truck-mounted hoists
14k–30k
GVWR roll-off trailers
~45 min
Charlotte to our plant
Home-state equipment
Roll-Off Equipment Made for North Carolina Jobs
Gridko builds two products under one roof in Statesville: cable roll-off trailers that hitch to a pickup, and cable roll-off hoists that mount on Class 5–8 trucks. Our welders, hydraulics techs and electricians come from commercial trucking, and what they build works the same Charlotte job sites, Triangle subdivisions and coastal cleanups our neighbors run every day.
- Charlotte metro construction & growth
- Raleigh-Durham & Triangle builders
- Greensboro & Winston-Salem haulers
- Wilmington & coastal storm cleanup
- Asheville contractors, farms & dumpster rental
Choosing the Right Roll-Off Setup
Begin with the truck or pickup you already own, then match it to the dumpster sizes your customers call for most.

Bumper Pull Trailers
14k–20k GVWR | 12'–16' containers
Hooks to a standard receiver hitch. Built for junk removal, cleanouts, landscaping and small rental fleets on tight residential streets.

Gooseneck Trailers
14k–30k GVWR | 12'–20' containers
Better weight distribution and towing stability for heavier loads. Built for construction debris, roofing tear-offs and busy dumpster routes.

Roll-Off Hoists
Class 5–8 trucks | up to 22' containers
Turn a cab-and-chassis into a roll-off truck. Electric over hydraulic or fully hydraulic reeving, in 36", 47", 60" and dual rail.
Which Hoist Fits Your Truck?
| Model | System | Max container | Truck | Min GVWR |
|---|---|---|---|---|
| GKH-145E | Electric over hydraulic | 14′ | Class 5 | 19,500 lb |
| GKH-180E / 180R | Electric / hydraulic reeving | 16′ | Class 6 | 22,000 lb |
| GKH-220E / 220R | Electric / hydraulic reeving | 18′ | Class 6–7 derated | 25,999 lb |
| GKH-300R | Hydraulic reeving | 22′ | Class 7 | 33,000 lb |
| GKH-400R | Hydraulic reeving | 22′ | Class 8 | 54,000 lb |
Why North Carolina Contractors Choose Gridko
Award-Winning Build
2026 NATDA Heavy Duty winner and Overall Trophy, the only builder recognized twice.
Built in North Carolina
Made in Statesville by a team from commercial trucking and heavy equipment.
Your Choice of Power
Electric over hydraulic, pony motor, or a live drive PTO wet kit.
Built to Your Fleet
Dexter axles, 20-ply tires, DOT LED lighting and any Sherwin-Williams color.
Built Right Here in Statesville
Our plant sits near the I-77 and I-40 crossroads, so it’s an easy drive from most of the state: about 45 minutes from Charlotte and roughly two and a half hours from Raleigh. North Carolina buyers can pick up in person and see their trailer or hoist on the shop floor. When you request a quote, ask about delivery options and current lead times.
We also build for operators in South Carolina, Virginia, Tennessee and Georgia.
- 1111 Johnson Dr, Unit B, Statesville, NC 28677
- 888-840-4046
- [email protected]
- 8 a.m.–5 p.m. Eastern, Monday–Friday
North Carolina Roll-Off Equipment FAQ
Right at the source. Gridko builds and sells factory-direct from our plant in Statesville, so North Carolina buyers deal with the builder, not a middleman. You can pick up at the plant or ask about delivery options when you request a quote.
About 45 miles, usually under an hour up I-77. From Raleigh it’s roughly 150 miles, or about two and a half hours.
Yes. The plant is at 1111 Johnson Dr, Unit B in Statesville, and the office is open 8 a.m. to 5 p.m. Eastern, Monday through Friday. Call 888-840-4046 before you head over so we can plan your visit.
You can choose electric over hydraulic, a fully hydraulic pony motor, or Gridko’s live drive PTO wet kit, which runs the hoist from the tow vehicle’s PTO. If your truck has no PTO provision, a bolt-on clutch pump does the job.
Hoists are offered with 36″, 47″, 60″ and dual rail spacing to fit common container setups, and trailers can be painted any Sherwin-Williams color to match your fleet.
A bumper pull (14k–20k GVWR, 12’–16′ containers) hooks to a standard receiver hitch and handles tight residential driveways well. A gooseneck (14k–30k GVWR, 12’–20′ containers) carries heavier loads and longer boxes with more stable towing.
Go by GVWR. The GKH-145E is for Class 5 trucks at 19,500 lb and up. The 180E/180R needs 22,000 lb (Class 6), the 220E/220R needs 25,999 lb (Class 6–7 derated), the GKH-300R needs 33,000 lb (Class 7) and the GKH-400R needs 54,000 lb (Class 8).
Let's Spec Your North Carolina Roll-Off Setup
Share the truck you drive, the container sizes you run and the kind of work you do. We’ll recommend the right trailer or hoist and get pricing back to you.