Factory-built for the Empire State

Roll-Off Trailers & Hoists in New York

Whether you’re clearing a gutted brownstone in the city or hauling for an upstate dairy farm, Gridko builds the cable roll-off trailers and Class 5–8 truck hoists New York crews rely on. Our Statesville, NC plant is roughly 600 miles from New York City.

2026

NATDA Overall Trophy

Class 5–8

Truck-mounted hoists

14k–30k

GVWR roll-off trailers

~9.5 hrs

NYC to our plant

From the five boroughs to upstate

Roll-Off Equipment for New York's Toughest Job Sites

Gridko focuses on two products and builds both in-house: cable roll-off trailers pulled by a pickup and cable roll-off hoists mounted on Class 5–8 trucks. Our team comes from commercial trucking, and the equipment is made for New York work like demolition on cramped city lots, municipal cleanup and moving containers around working farms.

Choosing the Right Roll-Off Setup

Two things decide the right setup for New York work: the truck you drive and the containers you rent out most.

Gridko Bumper Pull

Bumper Pull Trailers

14k–20k GVWR | 12'–16' containers
Hooks to a standard receiver hitch. Built for junk removal, cleanouts, landscaping and small rental fleets on tight residential streets.

Gooseneck Trailers

14k–30k GVWR | 12'–20' containers
Better weight distribution and towing stability for heavier loads. Built for construction debris, roofing tear-offs and busy dumpster routes.

Roll-Off Hoists

Class 5–8 trucks | up to 22' containers
Turn a cab-and-chassis into a roll-off truck. Electric over hydraulic or fully hydraulic reeving, in 36", 47", 60" and dual rail.

Which Hoist Fits Your Truck?

ModelSystemMax containerTruckMin GVWR
GKH-145EElectric over hydraulic14′Class 519,500 lb
GKH-180E / 180RElectric / hydraulic reeving16′Class 622,000 lb
GKH-220E / 220RElectric / hydraulic reeving18′Class 6–7 derated25,999 lb
GKH-300RHydraulic reeving22′Class 733,000 lb
GKH-400RHydraulic reeving22′Class 854,000 lb

Compare all hoist models →

Why New York Operators Choose Gridko

Award-Winning Build

2026 NATDA Heavy Duty winner and Overall Trophy, the only builder recognized twice.

Built in North Carolina

Made in Statesville by a team from commercial trucking and heavy equipment.

Your Choice of Power

Electric over hydraulic, pony motor, or a live drive PTO wet kit.

Built to Your Fleet

Dexter axles, 20-ply tires, DOT LED lighting and any Sherwin-Williams color.

Built in Statesville, Bought Direct by New York

New York City and Buffalo each sit about 600 miles from Statesville, roughly nine and a half hours behind the wheel, while Albany is closer to 700 miles. Some buyers make the trip to pick up at the plant and look over the build before it heads north. When you request a quote, ask about delivery options and current lead times for your area.

We also build for operators in New Jersey, Pennsylvania and Massachusetts.

New York Roll-Off Equipment Questions

Yes. Gridko sells factory-direct from its plant in Statesville, North Carolina. New York buyers can plan a pickup at the plant or ask about delivery options when requesting a quote.

About 600 miles, or roughly nine and a half hours by road. Buffalo is a similar distance, and Albany is about 700 miles away.

The bumper pull (14k–20k GVWR, 12’–16′ containers) runs off a standard receiver hitch and is the easier fit for tight residential work. The gooseneck (14k–30k GVWR, 12’–20′ containers) carries heavier loads and longer containers with more stable towing.

There are three main choices: electric over hydraulic, a fully hydraulic pony motor, or Gridko’s live drive PTO wet kit that runs the hoist from the tow vehicle’s PTO. A bolt-on clutch pump covers trucks that lack PTO provisions.

Go by GVWR. Class 5 (19,500 lb and up): GKH-145E for 14′ containers. Class 6 (22,000 lb): 180E/180R for 16′. Class 6–7 derated (25,999 lb): 220E/220R for 18′. Class 7 (33,000 lb): GKH-300R. Class 8 (54,000 lb): GKH-400R. The last two both handle 22′ containers.

Yes. Choose 36″, 47″, 60″ or dual rail hoist configurations to suit your containers, and pick any Sherwin-Williams color for your trailer.

The bumper pull trailer is the compact option. It hooks to a standard receiver hitch, handles 12’–16′ containers and is built with tight residential streets in mind. For truck-mounted work, the GKH-145E hoist fits Class 5 trucks and carries 14′ containers.

Tell Us About Your New York Work

Give us your truck specs, container sizes and the jobs you run. We’ll put together the right trailer or hoist and send pricing your way.