Direct from the builder to the Bay State
Roll-Off Trailers & Hoists in Massachusetts
Renovating a century-old triple-decker or staging containers on a packed Boston block takes equipment that fits the job. Gridko builds cable roll-off trailers and Class 5–8 truck hoists for Massachusetts crews at our Statesville, NC plant, about 800 miles from Boston.
2026
NATDA Overall Trophy
Class 5–8
Truck-mounted hoists
14k–30k
GVWR roll-off trailers
~12.5 hrs
Boston to our plant
Ready for Bay State job sites
What We Build for Massachusetts Contractors
Our shop turns out two things, both built in-house: cable roll-off trailers you can tow with a pickup and cable roll-off hoists for Class 5–8 trucks. The crew behind them comes from commercial trucking, and they build for work Massachusetts knows well: gutting older homes, squeezing into tight urban lots and keeping commercial sites clear of debris.
- Boston & Cambridge urban job sites
- Worcester commercial construction
- Springfield contractors & remodelers
- Lowell-area older-home renovation
- Dumpster rental & cleanout crews statewide
Choosing the Right Roll-Off Setup
For Massachusetts work, the right choice usually comes down to how tight your sites are, what truck you run and which containers you haul.

Bumper Pull Trailers
14k–20k GVWR | 12'–16' containers
Hooks to a standard receiver hitch. Built for junk removal, cleanouts, landscaping and small rental fleets on tight residential streets.

Gooseneck Trailers
14k–30k GVWR | 12'–20' containers
Better weight distribution and towing stability for heavier loads. Built for construction debris, roofing tear-offs and busy dumpster routes.

Roll-Off Hoists
Class 5–8 trucks | up to 22' containers
Turn a cab-and-chassis into a roll-off truck. Electric over hydraulic or fully hydraulic reeving, in 36", 47", 60" and dual rail.
Which Hoist Fits Your Truck?
| Model | System | Max container | Truck | Min GVWR |
|---|---|---|---|---|
| GKH-145E | Electric over hydraulic | 14′ | Class 5 | 19,500 lb |
| GKH-180E / 180R | Electric / hydraulic reeving | 16′ | Class 6 | 22,000 lb |
| GKH-220E / 220R | Electric / hydraulic reeving | 18′ | Class 6–7 derated | 25,999 lb |
| GKH-300R | Hydraulic reeving | 22′ | Class 7 | 33,000 lb |
| GKH-400R | Hydraulic reeving | 22′ | Class 8 | 54,000 lb |
Why Massachusetts Fleets Choose Gridko
Award-Winning Build
2026 NATDA Heavy Duty winner and Overall Trophy, the only builder recognized twice.
Built in North Carolina
Made in Statesville by a team from commercial trucking and heavy equipment.
Your Choice of Power
Electric over hydraulic, pony motor, or a live drive PTO wet kit.
Built to Your Fleet
Dexter axles, 20-ply tires, DOT LED lighting and any Sherwin-Williams color.
Factory-Direct to Massachusetts From Statesville
Boston is about 800 miles from our plant, which works out to roughly twelve and a half hours on the road. For a run that long, some buyers plan a pickup trip to Statesville and inspect the build before the drive home, while others prefer to talk through delivery options and current lead times when they request a quote.
We also build for operators in New York and Maine.
- 1111 Johnson Dr, Unit B, Statesville, NC 28677
- 888-840-4046
- [email protected]
- 8 a.m.–5 p.m. Eastern, Monday–Friday
Massachusetts Roll-Off FAQ
Yes. There’s no middleman: we sell factory-direct from our Statesville, North Carolina plant. Massachusetts buyers can arrange a pickup at the plant or ask about delivery options when they request a quote.
Roughly 800 miles, or about twelve and a half hours of driving to Statesville, NC.
Your GVWR decides it. A Class 5 truck rated 19,500 lb or more takes the GKH-145E (14′ containers). The 180E/180R suits Class 6 at 22,000 lb (16′), and the 220E/220R suits derated Class 6–7 trucks at 25,999 lb (18′). Heavier trucks move up to the GKH-300R at 33,000 lb (Class 7) or the GKH-400R at 54,000 lb (Class 8), each handling 22′ containers.
Pick electric over hydraulic, a fully hydraulic pony motor, or the Gridko live drive PTO wet kit, which runs off the tow vehicle’s PTO. A bolt-on clutch pump is available for trucks built without PTO provisions.
Most likely. Rail options include 36″, 47″, 60″ and dual rail, and trailers can be finished in any Sherwin-Williams color so new equipment matches the rest of your fleet.
Choose a bumper pull (14k–20k GVWR, 12’–16′ containers) if you want a standard receiver hitch and easier maneuvering on tight residential streets. Choose a gooseneck (14k–30k GVWR, 12’–20′ containers) if you haul heavier loads or longer containers and want more stable towing.
No. Gridko roll-off trailers are made to tow behind a pickup. The bumper pull uses a standard receiver hitch, and the gooseneck adds stability for heavier loads up to 30k GVWR.
Plan Your Massachusetts Roll-Off Build
Let us know what truck you drive, the container sizes you need and the jobs you take on. We’ll spec a trailer or hoist that fits and send you a quote.